Furuno GP-3300 - Manual (Page 86)

9-4
File name example
You enter a file name by selecting each character one by one with the
arrow keys and pressing the [ENT] key after selecting each charac-
ter. When you have finished entering the file name, select OK.
If you want to enter file name “FURUNO 1”, for example, do the
following:
1. Place the cursor on “F” by operating the trackball.
2. Press the [ENT] key.
3. Place the cursor on “U”.
4. Press the [ENT] key.
5. Enter the characters “R”, “U”, “N” and “O” and “1” as you did
“F” and “U”.
6. Place the cursor on “OK”.
7. Press the [ENT] key. SAVING” appears on the display during
recording. “SAVING COMPLETED” appears upon completion
of recording.
Note: The memory card contains a write-protection tab which pre-
vents overwriting of information stored on the card. This prevents
accidental erasure of important information. To write protect a memory
card, set the write-protection tab rightward as shown in Figure 9-6.
Slide tab right to
write protect.
Figure 9-6 How to write protect a memory card
9.3 Playing Back Memory Cards
Up to eight files can be played back on the display. Note that marks
and track currently displayed are not erased; they remain on the dis-
play together with played back file. Thus it is recommended that this
feature be used only for editing card contents.
1. Insert a memory card into the upper card slot.
2. Press the [MENU] key to display the menu.