Furuno GP-3300 - Manual (Page 87)

9-5
3. Press the [5] key to select DISPLAY MEMORY CARD.
5 DISPLAY M. C.
DISPLAY
00 TRACK YES
01 1 2 3 4 5 6 7 8 9 0 1 2 3 4 56 NO
02 MARK YES
20-JUN-1998
27-MAR-1998
10-APR-1998
TRACK-4000
Figure 9-7 DISPLAY M.C. screen
4. Place the cursor on the file you want to display.
5. Press [+] to show “DISPLAY YES.”
Note: If you more than eight files are selected to “DISPLAY
YES,” place cursor on unnecessary file and press [-] to show
“DISPLAY NO.”
6. Press the [ENT] key.
7. Press the [PLOT] key to return to the plot display.
9.4 Saving, Playing Back Initial Settings
You can save the contents of the INITIAL SETTINGS menu to a
memory card, and play back the contents when desired. This is useful
for maintaining several different sets of initial settings.
Saving initial settings
1. Open the card drive door and insert a memory card in the upper
card slot.
2. Press [MENU] and [3] to display the SAVE DATA TO MEMORY
CARD menu.
3. Press the [4] key to select INITIAL SETTINGS.
4. Press the [ENT] key.
Playing back initial settings
1. Open the card drive door and insert a memory card in the upper
card slot.
2. Press [MENU] and [4] to display the LOAD DATA TO MEMORY
CARD menu.
3. Press the [4] key to select INITIAL SETTINGS.
4. Press the [ENT] key.