Fluke 2625A - Manual (Page 182)

2620A/2625A
Users Manual
E-2
/*
-* decode(): Decode LOG_BIN? response string into raw byte stream
**
** Decoding is done on multiples of four input bytes:
**
** 543210 543210 543210 543210 (bit number in ASCII bytes)
** +--------+--------+--------+--------+
** | src[0] | src[1] | src[2] | src[3] | ASCII string input
** +--------+--------+--------+--------+
** 765432 107654 321076 543210 (bit number in raw bytes)
** / / /
** / / /
** | / /
** | / /
** | | /
** | | /
** | | |
** 76543210 76543210 76543210 (bit number in raw bytes)
** +--------+--------+--------+
** | dst[0] | dst[1] | dst[2] | Raw data output
** +--------+--------+--------+
**
** Inputs:
** dst Destination for binary data (must have enough space
** allocated; the maximum needed is 6 timestamp bytes + 3
** bytes for temp units, measurement rate, and digital I/O
** + 4 bytes/float * 22 floating point values = 97 bytes).
**
** src Source ASCII string (null terminated)
**
** Outputs:
** dst Set to binary data, based on ASCII string
**
** Returns:
** Number of bytes placed in destination buffer
*/
int
decode(dst, src)
unsigned char *dst;
char *src;
{
/* src to dst xlate */
static struct nibtab_s {
int lindex;
int lmask;
int lshift;
int rindex;
int rmask;
int rshift;
} nibtab[3] = {
/* left right */
0, 0x3f, 2, 1, 0x30, 4, /* dst[0] from src[0] and src[1] */
1, 0x0f, 4, 2, 0x3c, 2, /* dst[1] from src[1] and src[2] */
2, 0x03, 6, 3, 0x3f, 0, /* dst[2] from src[2] and src[3] */
};
auto unsigned char n;
auto struct nibtab_s *t;
auto unsigned char tmpsrc[4];
auto int dst_bytes;
/* Number of bytes created */
dst_bytes = 0;
/* Process src in chunks of four */
while (*src) {
/* Copy source, filing "holes" at end with zeros */
for (n = 0; n < 4; n++) {
if (*src)
tmpsrc[n] = *src++ - ’0’;
else
tmpsrc[n] = 0;
}
/* Mung source into destination */
for (t = nibtab; t < &nibtab[3]; t++) {
*dst = (tmpsrc[t->lindex] & t->lmask) << t->lshift;
*dst |= (tmpsrc[t->rindex] & t->rmask) >> t->rshift;
dst++;
dst_bytes++;
}
}
return (dst_bytes);
}
Figure E-1. ASCII String Decoding