Installation instructions, Installation, Fitting the decorative inner panel – Stovax PR0741 User Manual
Page 18
INSTALLATION INSTRUCTIONS
INSTALLATION
10
6.14 Turn the appliance off, disconnect the “U” gauge and
replace the sealing screw. Relight the appliance and check
the sealing screw for leaks.
7. FITTING ThE DECORATIvE INNER
PANEL
7.1 By rotating the panel, insert into fire box, Diagram 11.
11
AR1880
7.2 Check that the panel is sitting behind the rear ledge, but in
front of the spacer bracket so that it locates in the slot,
Diagram 12.
12
AR1930
7.3 Secure the panel using the two upper brackets and the
pozidrive screws, Diagram 13. Use only the rearmost hole
in the retaining bracket on each side.
18
8
AR1157
6.7 Coil up the surplus cable and locate in the back of the
firebox.
NEvER ShORTEN ThE CABLES, ThEy wILL BE REQUIRED
whEN SERvICING ThE APPLIANCE.
6.8 Replace the lower cover plate.
Note:
The cable adjuster may need to be tucked upward in
order to fit the lower cover plate.
B) SCrEW FIxIng METHod
6.9 Alternatively, this appliance can be secured back to the
fireplace opening using the screws and rawl plugs provided.
Place the firebox centrally in the opening and mark the
positions of the 4 fixing holes. Drill the holes and insert the
4 rawl plugs. See diagram 9
9
AR1375
6.10 Offer the firebox into the opening and ensure that the gas
supply pipe passes through the rubber seal.
6.11 Refit the burner assembly and secure the 5 pozidrive
screws. Connect the gas supply to the inlet connection on
the burner unit and tighten. It may be necessary to support
the inlet connection with another spanner whilst tightening
this joint. See diagram 10.
6.12 Turn on the gas supply to the appliance and check for
leaks. Light the fire and check all joints on the appliance for
leaks.
6.13 Remove the sealing screw from the inlet connection and
connect a suitable “U” gauge manometer. Light the fire and
turn to the maximum position, refer to the data badge and
ensure that the running pressure is correct. If the pressure
varies significantly from that on the data badge, this may
indicate a supply problem and will require immediate
attention.