Stovax PR0741 - Manual (Page 6)

USER INSTRUCTIONS
6
7.2 Lean the granite chippings against the burner ledges to
disguise the ledges.
5
AR1769
7.3 Check that the port area. Arrow A, is clear of granite
chippings. This can be easily done by gently running a
screwdriver or similar object along this area. Diagram 6.
NOTE: IT IS IMPORTANT THE GRANITE CHIPPINGS DO
NOT COVER THE PORT AREA IN BETWEEN THE BURNER
LEDGES.
6
AR1768
A
7.4 Ensure that no chippings over-hang or fill the pilot area,
Arrow B, Diagram 7.
NOTE: CHIPPINGS SHOULD NOT BE PLACED DIRECTLY
IN FRONT OF THE PILOT CROSS LIGHTING FLAME.
7
AR1770
B
7.5 Ensure that the fibre glass window seal on the box is intact.
Lower the glass window into the hooks on the box. Secure
the window using four screws in the retaining bracket,
Diagram 8.
8
AR1767
NEvER OPERATE ThE FIRE whEN ThE GLASS PANEL IS
REMOvED OR BROKEN.