Stovax PR0741 - Manual (Page 29)

29
7
AR1779
C
LogIC E-Box
4.5 Gently pull the ignition lead off the electrode, Diagram 8,
Arrow A.
4.6 Remove the two screws securing the pilot assembly,
Diagram 8 Arrow B.
8
AR1374
A
B
E-STUdIo & LogIC E-Box
4.7 Undo the thermocouple connection at the back of the gas
valve and the pilot pipe at the pilot elbow, Diagram 9
Arrows B and C.
9
AR1371
C
B
SERvICING INSTRUCTIONS
REPLACING PARTS
4. ODS PILOT UNIT
Note: You cannot service the pilot unit due to the complex nature
of its manufacture. Replacement of the complete unit must be
carried out when one of the following items becomes faulty:
• Pilot injector
• Ignition electrode
• Thermocouple
4.1 Access to the E-Studio pilot unit differs from the Logic
E-box. Follow the relevant instruction for your fire.
E-STUdIo
4.2 Gently pull the ignition lead off the electrode, Arrow A and
undo the screw shown at Arrow B, Diagram 5.
5
AR1777
B
A
4.3 Lift the shroud up and away from the pilot.
6
AR1778
4.4 Remove the two screws securing the pilot assembly.
Diagram 7, Arrow C.