GE 25831 - Manual (Page 14)

14
NOTE: While in room monitoring mode, the originating handset can be switched
to monitor by handset earpiece by pressing the TALK/CALLBACK button once.
Switch back to speakerphone by pressing the SPEAKER button once.
NOTE: Press the *EXIT button on the handset to exit room monitor mode.
H
ANDSET
S
ETUP
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (- or +) button to scroll to
HANDSET SETUP .
4. Press MUTE/PROG button to confirm and you may program the following items:
Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone ON/
OFF, Area Code, Registration, Deregistration and Default Setting.
During programming, you may press the *EXIT button at any time to exit the
menu and return to the sub-menu.
Make sure your phone is OFF (not in talk mode)
L
ANGUAGE
1. Press the CALLER ID-VOL (- or +) button to scroll to the SET LANGUAGE menu.
2. Press MUTE/PROG button to enter the menu.
SET LANGUAGE 1ENG 2FRA
3ESP shows in the display.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the
CALLER ID-VOL (- or +) button to scroll to the desired language. English is the
default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone and the selected language shows in the display.
H
ANDSET
N
AME
1. Press the CALLER ID-VOL (- or +) button to scroll to the HANDSET NAME menu.
2. Press MUTE/PROG button to enter the menu.
HANDSET NAME shows in the
display.
3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice
for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L.
Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space
between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.