GE 25831 - Manual (Page 16)

16
S
TORING
VIP M
ELODY
1. With handset in standby mode.
2. Press MUTE/PROG button once to display the submenus: ROOM MONITOR
and HANDSET SETUP .
3. Press the CALLER ID-VOL (- or +) button to scroll to the HANDSET SETUP .
4. Press MUTE/PROG button to enter into this HANDSET SETUP .
5. Press the CALLER ID-VOL (- or +) button to scroll to VIP MELODY submenu.
6. Press MUTE/PROG button to select VIP melody feature and then display VIP
1 record.
- If VIP1 does NOT contain any specific number/records, it will display EMPTY .
7. Press CALLER ID-VOL (- or +) button to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press MUTE/PROG button to display SELECT MEMORY .
NOTE: If the memory location does not contain any CID memory records and
you are trying to mark a specific record as VIP MELODY, then "SELECT
MEMORY" will not be displayed. Instead, “NO USER MEMORY” will display in
prompt to alert the user.
9. Press CALLER ID-VOL (- or +) button to view the records from memory to be
selected as VIP.
10. Press MUTE/PROG button to confirm and then display VIP MELODY 01 to wait
for the melody tone selection.
11. Press CALLER ID-VOL (- or +) button to select from melody 01 to melody 10 (a
testing tone is generated while making melody selection)
12. Press MUTE/PROG button to confirm.
NOTE: If the desired number/record was previously stored in any one of the
ten VIP melody records, "DUPLICATE NUMBER" shows in the display.
C
HANGING A
S
TORED
VIP M
ELODY
R
ECORD
Use the Storing VIP Melody procedure to change the number of a selected record
and replace the old phone number with new phone number.
When REPLACE VIP# ? shows in the display, you must press MUTE/PROG button
on the handset to confirm replacement.
R
EVIEWING
A
ND
D
ELETING
S
TORED
VIP M
ELODY
R
ECORD
1. Press the MUTE/PROG button to enter to VIP MELODY menu.