GE 25831 - Manual (Page 22)

22
3. Press the REDIAL button first, then use the CALLER ID-VOL (- or +) button to
select the desired redial number.
- Press the CALLER ID-VOL (+) to review the oldest call and scroll toward the
most recent calls (higher numbers).
- Press the CALLER ID-VOL (-) to review the newest call and scroll to older calls
(lower numbers).
NOTE: You may choose from three last dialed numbers.
4. Press the TALK/CALLBACK button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the REDIAL
button to quickly redial the number.
E
XIT
Press the *EXIT button to exit a menu function and return to the standby screen.
P
AGE
The page feature helps you locate a misplaced handset. To send and receive pages, all
handsets must be registered. If your handset is not registered, follow the instructions
in the Registration section of this manual.
H
ANDSET TO
H
ANDSET
P
AGING
Dual handsets are respectively named as Handset 1 and Handset 2.
1. Make sure the phone is OFF (not in talk mode).
2. Press and release the INT button on a handset. P AGING EXTENSION? shows in
the display.
3. Use the touch-tone pad to enter the handset number you want to page.
4. To cancel the page, press the *EXIT or INT button on the originating handset, or
press the TALK/CALLBACK button on the receiving handset.
P
AGING
A
LL
H
ANDSETS FROM A
H
ANDSET
1. Make sure the originating phone is OFF (not in talk mode).
2. Press and release the INT button on a handset. PAGING EXTENSION? shows in
the display.
3. Use the touch-tone pad to enter the handset number you want to page. (1= to page
Handset 1, 2=to page handset 2, etc., and 5=to page all handsets)
4. To cancel the page, press the *EXIT or INT button on the receiving handset, or
you may press TALK/CALLBACK on the originating handset.