GE 25831 - Manual (Page 20)

20
NOTE: Adjust the handset volume by pressing the CALLER ID-VOL (- or +)
button during a call.
H
ANDSET
S
PEAKERPHONE
O
PERATION
NOTE: If you are using the speakerphone, remain close to handset so the
party you are speaking to can hear you.
A
NSWERING A
C
ALL WITH THE
H
ANDSET
1. When the phone rings, press the SPEAKER button on the handset.
2. When finished, press the SPEAKER button again to hang up.
M
AKING A
C
ALL WITH THE
H
ANDSET
1. Make sure the phone is OFF (not in talk mode).
2. Dial the desired number,
or
Press the CALLER ID-VOL (- or +) button to select the desired record,
or
Press MEMORY button and then use CALLER ID-VOL (- or +) button to scroll to
desired memory record.
3. Press SPEAKER to dial number
4. When finished, press the SPEAKER button again to hang up.
NOTE: If you are using the handset and want to switch to the speakerphone, press
the SPEAKER button, press SPEAKER again to end conversation. If you are using
the speakerphone and want to switch to the handset, press the TALK/CALLBACK
button, press TALK/CALLBACK again to end conversation.
C
ALL
T
IMER
After you press the TALK/CALLBACK button on the handset, the built-in call timer
shows on the display and counts the length of time of the call in minutes and seconds.
P
RE
-D
IALING
1. Make sure the phone is OFF (not in talk mode).
2. Enter the telephone number you want to call. The telephone number shows in
the handset display.
3. Press the TALK/CALLBACK or SPEAKER button on the handset, and the number
automatically dials.