GE 25831 - Manual (Page 33)

33
B
ATTERY
S
AFETY
P
RECAUTIONS
• Do not burn, disassemble, mutilate or puncture. Like other batteries of this type,
toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
B
ELT CLIP AND
O
PTIONAL
H
EADSET
C
ONNECTING THE
B
ELT
C
LIP
1. To attach the belt clip, insert the sides of the belt clip into
the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
C
ONNECTING AN
O
PTIONAL
H
EADSET TO
THE
H
ANDSET
Each handset can be used with an optional headset
hands free operation.
1. Connect the headset to the headset jack on the
side of the handset The handset receiver and
microphone are disabled when the headset is
connected.
2. Adjust the headset to rest comfortably on top of
your head and over your ear. Move the
microphone to approximately two to three
inches from your mouth.
3. Press the TALK/CALLBACK button to answer a call or
make calls using the headset.
4. To return to normal operation, unplug the
headset from the jack.
NOTE: The RBRC seal on the battery used in your ATLINKS
USA, Inc. product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries
throughout the United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
Belt clip
Slot for
belt clip Slot for
belt clip
Headset jack
Headset Plug