GE 25831 - Manual (Page 17)

17
2. Use the CALLER ID-VOL (- or +) button to scroll to the desired VIP
Melody Record.
3. If you want to delete the information, press the DELETE button on the
handset while the entry displays. The display show
DELETE VIP# ? .
4. Press DELETE again to confirm. You will hear a confirmation tone and VIP#
DELETED show in the display.
A
REA
C
ODE
1. Press the CALLER ID-VOL (- or +) button to scroll to the AREA CODE menu.
2. Press MUTE/PROG button to enter the menu. SET AREA CODE - - - shows in the
display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and
the new area code shows in the display.
NOTE: To restore the default setting to - - -, press and release DELETE when
“SET AREA CODE” shows in the display.
K
EY
T
ONE
1. Press the CALLER ID-VOL (- or +) button to scroll to the KEY TONE menu.
2. Press MUTE/PROG button to enter the menu. SET KEY TONE 1ON 2 OFF shows
in the display.
3. Use the touch tone pad on the handset to select 1 or 2, or use the CALLER ID-VOL
(- or +) button to scroll to your selection. “ 1ON ” is the default setting.
4. Press the MUTE/PROG button to confirm and the key tone setting shows in
the display.
R
EGISTRATION
Your dual handsets are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
1. If necessary, press the MUTE/PROG button to go to the REGISTRATION menu.
The default is “ 2NO ”.
2. Use the touch-tone pad to select 1 for YES or 2 for NO . Or use the CALLER ID-
VOL (- or +) button to scroll to 1YES or 2NO .