GE 25831 - Manual (Page 25)

25
T
HREE
-W
AY
C
ALLING
1. During an external call, press the INT key. LINE ON HOLD EXTENSION? shows
in the display.
2. Use the touch-tone pad to select Handset 1 or Handset 2. You will hear a paging
tone and PAGING shows in the originating handset’s display.
NOTE: “PAGING FROM...” shows in the display on the receiving handset, and
the receiving handset presses the INT or TALK/CALLBACK button to answer
the intercom.
3. When the receiving handset connects, press the FORMAT/CONF button on
the originating handset to conference with the receiving handset and the
external caller.
CONFERENCE shows in the display on the originating and
receiving handsets.
NOTE: A handset can enter conference mode directly by pressing TALK/
CALLBACK on the second handset during a call.
T
RANSFERRING
E
XTERNAL
C
ALLS TO
O
THER
H
ANDSETS
During an external call, you may transfer the external call to another handset.
1. Press the INT button on the originating handset to put an external call on hold,
and then page the receiving handset.
2. Use the touch-tone pad on the handset to select Handset 1 or Handset 2. You will
hear a paging tone. PAGING shows on the originating handset’s display, and
PAGING FROM... shows on the receiving handset’s display.
3. When the receiving handset connects, press the TALK/CALLBACK button on the
originating handset to transfer the call.
-OR-
4. Press the TALK/CALLBACK button on the originating handset to transfer the
call. If the receiving handset does not answer within 30 seconds, the originating
handset rings back and displays
CALLBACK . If the originating handset does not
answer within 20 seconds, the call is automatically dropped.
M
EMORY
You may store fifty 15-character names and 20-digit telephone numbers in the
handset memory.
S
TORING A
N
AME AND
N
UMBER IN
M
EMORY
1. Make sure the phone is OFF (not in talk mode).