GE 25831 - Manual (Page 15)

15
NOTE: If you make a mistake, use the DELETE button to backspace and
delete one character at a time.
4. Press the MUTE/PROG button to save your name. You will hear a confirmation
tone and the handset name shows in the display.
R
INGER
T
ONE
You may choose from ten different ringer tones and ten different melodies.
1. Make sure the ringer is turned on. See Ringer On/Off section.
2. Press the CALLER ID-VOL (- or +) button to scroll to the RINGER TONE menu.
3. Press MUTE/PROG button to enter the menu. SET RINGER TONE 01 shows in
the display. " 01 " is default setting.
4. Use the CALLER ID-VOL (- or +) button to scroll to the desired setting (1 through
20). You will hear a sample of the ringer tone/melody you select.
5. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone and the selected ringer tone shows in the display.
R
INGER
V
OLUME
1. Press the CALLER ID-VOL (- or +) button to scroll to the RINGER VOLUME menu.
2. Press MUTE/PROG button to enter the menu. SET RINGER 1HI 2LOW 3OFF shows
in the display.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the CALLER ID-VOL
(- or +) button to scroll to your selection. HI is the default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a confirmation
tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
VIP M
ELODY
This features allow you to assign a specific melody to someone you want to get
your attention when the person calls. When a VIP melody is assigned and that
person calls, the unit rings the normal ring for the first ring and then follows with
VIP melody ring. You may choose from ten different polyphonic melodies and may
store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the memory. (Refer
to Storing CID Records in Internal Memory). “NO USER MEMORY” will show
in the display to remind the user to do CID record transfer first.