GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B - Manual (Page 150)

5
5-23 GFK-1004B Chapter 5 The Station Manager
“Modify Commands”). If you are not logged in, you will not see the modify command
listing.
A typical HELP command when you are not logged in, i.e., you are in Monitor level, is
shown below:
> help
<<< Monitor Commands >>>
? bps channel date exs help log
login ltime prog node show sosw stat
tally time
A typical HELP command when you are logged in is shown below:
= help
<<< Monitor Commands >>>
? bps channel date exs help log
login ltime prog node show sosw stat
tally time
<<< Modify Commands >>>
chbps chdate chltime chsosw chtime clear clsosw
load logout net ok ping rem report
repp restart stopp stopt test trace