GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B - Manual (Page 39)

2
2-18 TCP/IP Ethernet Communications User’s Manual – January 1996 GFK-1004B
4. Make sure Ethernet Interface IC697CMM741 is selected and press Enter. You will
then see the screen shown below.
5. Move the cursor to the Config Mode field showing TCP/IP and press Tab. This
changes the field to MMS-ETHERNET. Press Enter to accept the change. The fields
in the screen will change as shown below.