ETL EDP70 - Manual (Page 53)

MI00/10056 rev. 8 — 05/2006-- page 53
The measurement signals are accessed from the battery rectifier page as follows:
RECT/BATT ALARMS
NO ALARMS ACTIVE
Normal operating mode
press once
RECTIFIER
Vdc xxx V Idc xxx A
Displays the output voltage and current supplied by the
rectifier.
press once
BATTERY
Vdc xxx V Ib xxxx A
Displays the battery voltage and the charge or
discharge current of the battery (ve = charge, - ve =
discharge)
The measurement signals are accessed from the inverter page as follows:
INVERTER ALARMS
NO ALARMS ACTIVE
Normal operating mode
press once
INVERTER F xx.x Hz
A xxx V B xxx V C xxx V
Displays the frequency and phase-neutral voltage at
which the inverter is running.
press once
INVERTER F xx.x Hz
AB xxx V BC xxx V CA xxx V
Displays the frequency and phase-phase voltage at
which the inverter is running.
press once
INVERTER
A xxx A B xxx A C xxx A
Displays the current at which the inverter is running.