Gefen GEF-DVIKVM-848DL - Manual (Page 10)

7
PANEL DESCRIPTIONS
Back Panel
1 RS-232 Serial Port
Connects to the RS-232 control device. The 8x8 DVI KVM Dual Link Matrix
may be switched remotely using this port. See page 16 for more information.
2 AC 110/220V (50/60 Hz) Power Cable Receptacle
Connect the included AC power cord from this receptacle to an available
electrical outlet.
3 Fuse Drawer
Each power receptacle houses a fuse drawer. Within each fuse drawer are two
(2) 250 V fuses. One fuse is active and the other is a spare.
4 DVI Input Ports (1 - 8)
Connect DVI source devices to these ports.
5 IP Control Interface
Connect to this port to control the 8x8 DVI KVM Dual Link Matrix using IP
Control. See page 31 for more information.
6 IR Extender Port
Connect an IR extender cable to this port.
7 USB Output Ports (16)
Connect USB devices to these ports (two outputs per channel).
8 DVI Output Ports (1 - 8)
Connect DVI monitors to these ports.
9 USB Input Ports (1 - 8)
Connect USB source devices to these ports
10 Audio Output Connector (3.5 mm Mini-Stereo)
Connect audio devices to these ports using 3.5 mm mini-stereo cables.
11 Audio Input Connectors (3.5 mm Mini-Stereo)
Connect audio output devices to these ports using 3.4 mm mini-stereo cables.