Ip control – Gefen GEF-DVIKVM-848DL User Manual
Page 40
37
IP CONTROL
IP Confi guration
The IP Confi guration page is used to set the IP settings that will be used to
access the Web interface. The following items can be confi gured from this menu.
•
IP Address (Default: 192.168.0.70)
•
Subnet (Default: 255.255.255.0)
• Gateway
(192.168.0.1)
•
Port (Default: 80)
To change these settings follow the steps below.
1. Enter the desired network information into the fi elds provided.
2. Press the “Save” button to initiate the change(s).
Note:
After this command is complete the user will be returned to the Main Page.
Setting made on this page will not take effect until the unit is restarted. Please
disconnect power from the unit and reconnect power for changes to take effect.
At anytime, the “Reset” button can be pressed to return the IP settings to their
defaults.