Gefen GEF-DVIKVM-848DL - Manual (Page 33)

30
RS-232 SERIAL CONTROL
M Command
The M command displays the current routing status of the matrix.
Syntax:
m
Parameters:
None
F Command
The F command returns the state of pin 14 of the DVI inputs.
Syntax:
f param1 param2
Parameters:
param1 DVI input [1 - 8]
param2 State [0 - 1]
Notes:
“High” is returned if +5V is enabled on the DVI input. “Low” is returned if +5V is
disabled on the DVI input.