Rs-232 serial control – Gefen GEF-DVIKVM-848DL User Manual
Page 29
Advertising
26
RS-232 SERIAL CONTROL
General Functions
Function
Description
#ACTIVEBOLO
Enables the boot loader
#FADEFAULT
Set matrix to default settings
#LOCKPOWER
Toggles the lock power state
#MASKOUT
Blanks selected outputs
#RMTIRADD
Set the remote IR channel
#STBYMODE
Sets the Matrix to Standby Mode
#ACTIVEBOLO Function
The #ACTIVEBOLO function enables the boot loader allowing the Matrix to be
updated with fi rmware using RS-232.
Syntax:
#ACTIVEBOLO
Parameters:
None
Notes:
The #ACTIVEBOLO command must be typed twice in order to activate the boot
loader.
#FADEFAULT Function
The #FADEFAULT function sets all Local EDIDs and routing settings to default,
turns off all FO 5V to inputs, sets IR address to 0, and disables #LOCKPOWER,
and #LOCKEDID.
Syntax:
#FADEFAULT
Parameters:
None
Advertising