Gefen GEF-DVIKVM-848DL - Manual (Page 27)

24
RS-232 SERIAL CONTROL
#SNETMASK Function
The #SNETMASK function specifi es a new net mask.
Syntax:
#SNETMASK param1 param2 param3 param4
Parameters:
param1 IP address [0 - 255]
param2
IP address [0 - 255]
param3
IP address [0 - 255]
param4
IP address [0 - 255]
Notes:
A reboot is required after the new net mask has been set.
#SGATEWAY Function
Specifi es the new IP gateway.
Syntax:
#SGATEWAY param1 param2 param3 param4
Parameters:
param1
Gateway address [0 - 255]
param2 Gateway address [0 - 255]
param3 Gateway address [0 - 255]
param4 Gateway address [0 - 255]
Notes:
A reboot is required after the gateway address has been assigned.