Rs-232 serial control – Gefen GEF-DVIKVM-848DL User Manual
Page 26
Advertising
23
RS-232 SERIAL CONTROL
#RSTIP Function
The #RSTIP function sets the IP confi guration to the default settings.
Syntax:
#RSTIP
Parameters:
None
Notes:
A reboot is required after restoring the default IP settings.
#SIPADD Function
The #SIPADD function specifi es a new IP address.
Syntax:
#SIPADD param1 param2 param3 param4
Parameters:
param1
IP
address
[0
-
255]
param2
IP address
[0 - 255]
param3
IP
address
[0
-
255]
param4
IP
address
[0
-
255]
Notes:
A reboot is required after the new IP address is set.
Advertising