Gefen GEF-DVIKVM-848DL - Manual (Page 22)

19
RS-232 SERIAL CONTROL
#EDIDBATOLO Function
The #EDIDBATOLO function reads the downstream EDID and stores it to any
local input.
Syntax:
#EDIDBATOLO param1 param2 [param3...param9]
Parameters:
param1
EDID bank offset [1 - 5]
param2 Input [1 - 8]
Notes :
If param2 = 0, then the EDID in the specifi ed bank is copied to all eight inputs.
#EDIDDETOLO Function
The #EDIDDETOLO function stores the Default EDID (640x480) in the specifi ed
Local EDID inputs.
Syntax:
#EDIDDETOLO param1 param2 param3...param9
param1
Input [1 - 8]
Notes
:
If param1 = 0, then all 8 DVI inputs will be set to the Default EDID.