Gefen GEF-DVIKVM-848DL - Manual (Page 31)

28
RS-232 SERIAL CONTROL
#RMTIRADD Function
The #RMTIRADD function set the remote IR channel.
Syntax:
#RMTIRADD param1
Parameters:
param1 IR channel [0 - 3]
#STBYMODE Function
The #STBYMODE function disables / enables standby power mode.
Syntax:
#STBYMODE param1
Parameters:
param1 Disable / Enable [0 - 1]
Value Meaning
0 Disable Standby Mode
1 Enable Standby Mode