Gefen GEF-DVIKVM-848DL - Manual (Page 30)

27
RS-232 SERIAL CONTROL
#LOCKPOWER Function
The #LOCKPOWER enables/disables the power lock state. Enabling this feature
will store the 5V status for each input prior to shutting the unit down. This pre-
serves the 5V state when the Matrix is restarted.
Syntax:
#LOCKPOWER param1
Parameters:
param1
State [0 - 1]
Value Meaning
0 Disable Power Lock
1 Enable Power Lock
#MASKOUT Function
The #MASKOUT function allows blanking or selected outputs.
Syntax:
#MASKOUT param1 param2
Parameters:
param1 Output [1 - 8]
param2 Output [1 - 8]
Notes:
The current masking state will be lost if power is lost.