Motorola WR850GP - Manual (Page 19)

Installation Section 2
WR850 2-5
2 To print the Wall Mounting Template, click the Print icon or choose Print from the File
menu.
3 In both the Pages from and to fields, enter the page number on which the Wall
Mounting Template appears.
4 Click OK.
5 Measure the printed template with a ruler to ensure that it is the same size as the
template on page 2-3.
6 Use a center punch to mark the center of the holes on the wall.
7 On the wall, locate the marks for the mounting holes you just made.
WARNING!
Before drilling holes, check the structure for potential damage to water, gas, or
electric lines.
8 Drill the holes to a depth of at least 3.8 cm (11⁄2 inches).
9 If necessary, seat an anchor in each hole. Use M5 x 38 mm (#10-16 x 11/2 inch) screws
with a flat underside and maximum screw head diameter of 10.5 mm to mount the
router.