Motorola WR850GP - Manual (Page 79)

Section 3 Configuration
3-46 WR850
WIRELESS Page – All Configuration Options
Options related to:
ESTABLISHING YOUR WIRELESS NETWORK
Field Description
Wireless Interface:
(ADVANCED)
Sets the wireless interface to be configured.
NOTE: The WR850 currently offers only one interface; future
versions of WR850 hardware may include multiple wireless
interfaces.
FACTORY DEFAULT:
Built-in WR850 Wireless MAC address, as
printed on the product label as “Wireless MAC”.
Network Name
(SSID):
Sets the Network Name (also known as SSID, or Service Set
Identifier) of this wireless interface.
When a client looks to connect wirelessly to this WR850, this
SSID will be the identifier by which they recognize the network.
The SSID can be up to 32 alphanumeric characters.
FACTORY DEFAULT:
motorola + the Wireless MAC address
Network Type:
(ADVANCED)
Sets whether or not the WR850 openly broadcasts its SSID over
the wireless network, for clients to identify in passive scans.
• Selecting Open enables SSID broadcasting and
responses to passive scans by clients.
• Selecting Closed disables SSID broadcasting; the
WR850 will respond only to active scans by clients.
FACTORY DEFAULT:
Open
AP Isolation:
(ADVANCED)
Sets whether or not associated wireless clients will be able to
communicate with each other through the access point.
• Selecting On disables client-to-client communications.
FACTORY DEFAULT:
Off