Motorola WR850GP - Manual (Page 43)

Section 3 Configuration
3-10 WR850
BASIC Page Action Buttons
At the bottom of the BASIC Page, you will see four click-able buttons to process any
desired changes to the configuration options.
Button Purpose
Apply This button allows you to apply the settings you have selected for
BASIC Page configuration options.
When you click the Apply button, you will see an “Applying Changes”
page that shows the status of validating and committing the new
selections that have been made.
If no errors were made in the new selections, the prior selections
(including any default settings) will be overridden with your new
selections. If errors were made in the new selections, you can return
to the BASIC Page to correct and re-apply them.
NOTE: Applying changes on the BASIC Page will reboot your WR850.
During a reboot, you may temporarily lose your connection to the
Web-based Configuration Utility.
Cancel Cancels all changes you have made on the BASIC Page, reverting
the page to its previously saved configuration.
Any new selections will be deleted and not be applied.
Restart Restarts your WR850. This can be used to reset WR850 logs and
refresh information.
Restore
Factory
Configuration
This button resets all configuration options to their original factory
default settings.
NOTE: This button will reset configuration options on all pages to
defaults, not just the options on the BASIC Page.