Motorola WR850GP - Manual (Page 64)

Configuration Section 3
WR850 3-31
Blocking Internet Use at All Times – Using IP Addresses
For this example, we assume that:
• there is one PC to be restricted, and
• the IP address assigned to that PC is 192.168.10.4.
Step 1: At LAN Usage Filters, under LAN IP Address Range, on consecutive lines enter
the IP address(es) of the PC(s) to be restricted.
NOTE: If you intend to restrict multiple clients in the home, it is best to assign them consecutive
IP addresses, to allow you to enter a single LAN IP Address Range without disabling
another client.
Step 2: Under Protocol, select TCP on one line and UDP on the next.
Step 3: Under Destination Port Range, enter the entire port range (0 through 65535)
on both lines.
Step 4: At the end of each line, check the Enabled box to engage the filters.
Step 5: At the bottom of the page, click the Apply action button.