Motorola WR850GP - Manual (Page 61)

Section 3 Configuration
3-28 WR850
Field Description
LAN Usage
Filters:
(continued)
• Selecting TCP restricts use of the Transmission Control
Protocol, an end-to-end protocol defining rules and
procedures for data exchange between hosts.
• Selecting UDP restricts use of the User Datagram Protocol,
which is used in conjunction with the Internet Protocol (IP) to
send data in the form of message units.
FACTORY DEFAULT:
TCP
(3) Destination Port Range:
These two fields define a range of ports to which the filtering rule will
apply. To apply a rule to a specific port, enter the same port number
in both fields.
FACTORY DEFAULT:
(blank)
(4) Days-of-the-Week Range:
These two fields define a range of days of the week on which the
filtering rule will apply. The From Day will be the first day of the
week on which the rule will apply; the To Day will be the first day of
the week on which the rule will not apply.
To apply a rule continuously, select the same From Day and To Day.
FACTORY DEFAULT:
From Sunday To Sunday (continuous)
(5) Hours-of-the-Day Range:
These two fields define a range of hours of the day on which the
filtering rule will apply. This range will apply equally to all days
selected in the Days-of-the-Week Range.
The From Hour will be the first hour of the day during which the rule
will apply. The rule will be applied until the beginning of the To Hour.
To apply a rule continuously, select 12:00AM for both From Hour
and To Hour.
FACTORY DEFAULT:
From 12:00AM To 12:00AM (continuous)