Motorola WR850GP - Manual (Page 39)

Section 3 Configuration
3-6 WR850
BASIC Page – All Configuration Options
Options related to:
CONTROLLING ACCESS TO THE CONFIGURATION UTILITY
Field Description
Configuration
Login Username:
Sets your user name to access this Web-based Configuration Utility.
FACTORY DEFAULT:
admin
Configuration
Login Password:
Sets your password to access this Web-based Configuration Utility.
FACTORY DEFAULT:
motorola
NOTE: Once you have logged in, for security reasons you should change the default User Name
and Password. If necessary, the default settings can be reset, either by clicking the Restore
Factory Configuration button at the bottom of the BASIC Page (which will reset all options to
factory defaults), or by using the Reset button on the back of the WR850 (which, as referenced in
Section 1 of this User Guide, will reset only a select number of options).
If you wish, you can disable access control by leaving both the Configuration Login Username
and Configuration Login Password blank, but this is not recommended.
Remote Login
Port:
(ADVANCED)
Enables access to the Web-based Configuration Utility while away
from your home or office, through your broadband connection. An
HTTP port (such as 8080) must be provided to enable remote
access. Leave this field blank to disable remote access.
FACTORY DEFAULT:
(blank)
Options related to:
ENABLING PRIMARY ROUTER FUNCTIONS
Field Description
Operation Mode:
(ADVANCED)
Enables the primary router functions of the WR850. These router
functions include:
• Routing data in your local network using IP addresses of the
connected devices, allowing the IP address for your
broadband connection to be shared among those devices.
This is called Network Address Translation (NAT).
(continued on next page)