Motorola WR850GP - Manual (Page 95)

Section 3 Configuration
3-62 WR850
Field Description
802.1X
Authentication:
(continued)
• Selecting Enabled sets the WR850 to work with a RADIUS
server, without engaging WPA or WPA2 (below).
• Selecting Disabled sets the WR850 to work with a RADIUS
server only if used with WPA or WPA2 (below).
NOTE: 802.1X Authentication requires you to complete the
configuration options related to “Setting Up Compatibility with
a RADIUS Server”.
NOTE: 802.1X Authentication can be enabled concurrently with WPA
or WPA2, but the WR850 can only support one RADIUS server
on the network.
FACTORY DEFAULT:
Disabled
WPA:
(ADVANCED)
Enables 802.1X-based WPA authentication with a RADIUS server.
• Selecting Enabled engages WPA.
• Selecting Disabled disengages WPA.
NOTE: WPA requires you to complete the configuration options related
to “Setting Up Compatibility with a RADIUS Server”.
NOTE: WPA requires a WPA Encryption method (below).
FACTORY DEFAULT:
Disabled
WPA2:
(ADVANCED)
Enables 802.1X-based WPA2 authentication with a RADIUS server.
• Selecting Enabled engages WPA2.
• Selecting Disabled disengages WPA2.
NOTE: WPA2 requires you to complete the configuration options related
to “Setting Up Compatibility with a RADIUS Server”.
NOTE: WPA2 requires a WPA Encryption method (below).
FACTORY DEFAULT:
Disabled
WPA2 Pre-
authentication:
(ADVANCED)
Enables clients to authenticate, in advance, with multiple access
points, in order to roam quickly among access points.
• Selecting Enabled allows clients to pre-authenticate with the
WR850.
• Selecting Disabled does not allow clients to pre-authenticate
with the WR850.
NOTE: WPA2 Pre-authentication is greyed out and unchangeable
unless WPA2 (above) is Enabled.
FACTORY DEFAULT:
Disabled