Motorola Series Switch WS5100 - Manual (Page 126)

4-52 WS5100 Series Switch System Reference Guide
6. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
7. Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
8. Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.
4.5.3 Viewing VLAN/Tunnel Assignments
The VLAN/Tunnel Assignment screen displays current SSID to VLAN assignments. If necessary, use the
checkboxes within the screen to associate (or un-associate) existing SSIDs with the VLANs listed. Each
configured VLAN is available within the screen and (if necessary) can be mapped to WLAN to ensure mission
critical WLANs have an available VLAN interface.
To view existing VLAN Assignments:
1. Select Network > Wireless LANs from the main menu tree.
2. Click the VLAN/Tunnel Assignment tab.
3. Select a SSID from the table to view its VLAN assignment information.
The VLAN/Tunnel Assignment tab displays the following information:
NOTE: Mapping multiple WLANs, on the same VLAN, with different security settings to a
single BSS poses a security risk to the system.
Name Displays a short description of the WLAN. This description can be added or edited using the
Edit button on the Configuration tab within the WLANs page.