Motorola Series Switch WS5100 - Manual (Page 234)

6-10 WS5100 Series Switch System Reference Guide
2. Click the Configuration tab.
The MU Intrusion Detection tab consists of the following two fields:
• Collection Settings
• Violation Parameters
3. Within the Collection Settings field, set the Detection Window interval (in seconds) the switch uses
to scan for MU violations. The available range is from 5 - 300 seconds.
4. Refer to the Violation Parameters field to define threshold values that trigger an alarm:
5. Click on Apply button to save the configuration.
Violation Type Displays the name of the violation for which threshold values are set in the mobile unit, radio
and switch columns.
Mobile Unit Set the MU threshold value for each violation type. If exceeded, the MU will be filtered and
displayed within the Filtered MUs screen. Set the values appropriately in respect to the
number of MUs within the switch managed network and how often they will be associating/
disassociating, and having their authentication and encryption credentials verified.
Radio Set the radio threshold value for each violation type. If exceeded, the MU will be filtered and
displayed within the Filtered MUs screen.
Switch Set the switch’s threshold value for each violation type. If exceeded, the offending MU will
be filtered (from the switch) and displayed within the Filtered MUs screen.
Time to Filter Set the Time to Filter interval (in seconds) the switch uses to filter out MUs that have been
defined as committing a violation. Refer to Viewing Filtered MUs on page 6-11 to review the
contents of the MUs that have been filtered thus far.
CAUTION: Setting mobile unit threshold values too low can jeopardize MU performance
or break the MU’s connection.
!