Motorola Series Switch WS5100 - Manual (Page 9)

About This Guide
Introduction
This guide provides information about using the WS5100 Series Switch.
Documentation Set
The documentation set for the WS5100 Series Switch is partitioned into the following guides to provide
information for specific user needs.
• WS5100 Installation Guide - describes the basic setup and configuration required to transition to more
advanced configuration of the switch.
• WS5100 CLI Reference - describes the Command Line Interface (CLI) and Management Information
Base (MIB) commands used to configure the WS5100 Series Switch.
• WS5100 Migration Guide - provides upgrade instructions and new feature descriptions for legacy
users of the WS5100 Series Switch.
• WS5100 Troubleshooting Guide- describes workarounds to known conditions the user may encounter.
• RF Management Software Users Guide - describes how to use Motorola RFMS to set up and monitor
your WS5100 in respect to areas of good RF throughput and defined physical barriers.
Document Conventions
The following conventions are used in this document to draw your attention to important information:
NOTE: Screens and windows pictured in this guide are samples and can differ from actual
screens.
NOTE: Indicate tips or special requirements.
CAUTION: Indicates conditions that can cause equipment damage or data loss.
WARNING! Indicates a condition or procedure that could result in
personal injury or equipment damage.
!