Motorola Series Switch WS5100 - Manual (Page 85)

Network Setup 4-11
4.3.1 Editing the Details of an Existing VLAN
To revise the configuration of an existing VLAN:
1. Select Network > Virtual LANs from the main menu tree.
2. Select an Ethernet for which you want to configure the VLAN and click on the Edit button.
The system prompts you with a Port VLAN Change Warning message stating communication
disruptions could occur with the switch.
3. Click OK to continue.
4. The Layer 2 Virtual LANs Edit dialog box for the selected ethernet allows you to configure/modify the
VLANs.
5. Use the Edit screen to modify the following:
Name Displays a read only field and with the name of the Ethernet to which the VLAN is associated.
Mode Use the drop-down menu to select the mode. It can be either:
• Access– This ethernet interface accepts packets only form the native VLANs. If this mode
is selected, the Allowed VLANs field is unavailable.
• Trunk–The ethernet interface allows packets from the given list of VLANs that you add to
the trunk.