Motorola Series Switch WS5100 - Manual (Page 76)

4-2 WS5100 Series Switch System Reference Guide
To view the switch’s Network configuration:
1. Select Network from the main menu tree.
2. Refer to the following information to discern if configuration changes are warranted:
DNS Servers Displays the number of DNS Servers configured thus far for use with the switch. For more
information, see
Viewing Network IP Information on page 4-3 .
IP Routes Displays the number of IP routes for routing packets to a defined destination. For information
on defining IP Routes, see
Configuring IP Forwarding on page 4-5 .
Additional
Resolution Entries Displays the number of mappings of layer three (IP) addresses to layer two (MAC) addresses.
For more information, see
Viewing Address Resolution on page 4-8 .
Switch Virtual
Interfaces Displays the number of virtual interfaces (VLANs) defined thus far for the switch. New
VLANs can be defined or existing VLANs can be modified as needed. For more information,
see
Configuring Switch Virtual Interfaces on page 4-12 .
Wireless LANs Displays the number of WLANs currently defined on the switch. The switch has 32 default
WLANs. New WLANs can be added as needed, and
their descriptions, VLAN
assignments and security schemes modified. For more information, see Viewing and
Configuring Switch WLANs on page 4-20 .
Mobile Units Displays the number of MUs currently associated to (and interacting with) the switch. The
details of individual MUs can be displayed as needed. For more information, see
Viewing
Associated MU Details on page 4-57 .