Motorola Series Switch WS5100 User Manual
Page 308
6-84 WS5100 Series Switch System Reference Guide
8. Use the
Using
drop down-menu to configure whether the log file transfer will be sent using FTP or TFTP.
9. Enter the
IP Address
of destination server or system receiving the target log file.
10.Enter the
User ID
credentials required to send the file to the target location.
Use the user ID for FTP transfers only.
11.Enter the
Password
required to send the file to the target location using FTP.
12.Specify the appropriate
Path
name to the target directory on the local system disk or server as
configured using the "To" parameter.
If the local server option is selected, use the browse button to specify the location on the local server.
13.Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
14.Click the
Transfer
button when ready to move the target file to the specified location.
Repeat the process as necessary to move each desired log file to the specified location.
15.Click the
Close
button to exit the screen after a transfer. There are no changes to save or apply.