Motorola Series Switch WS5100 - Manual (Page 143)

Network Setup 4-69
settings as well as a set of advanced properties in case its transmit and receive capabilities need to be
adjusted.
To edit a radio’s configuration:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Configuration tab.
3. Select a radio to edit from the table.
4. Click the Edit button to display a screen containing settings for the selected radio.
5. In the Radio Descr. field, enter a brief description to identify the radio. The Radio Description is used to
differentiate multiple radios of the same type and can be used to locate a radio if there are any problems.
6. Select the Dedicate this Radio as Detector option to use this radio as a detector port to identify rogue
APs on the network.
Setting this radio as a detector dedicates the radio to detect rogue APs on the network. Dedicated
detectors do not connect to clients.
7. Select the Single-channel scan for Rogue APs checkbox to enable the switch to scan for rogue
devices using the switch’s current channel of operation.
NOTE: The display of the screen can vary slightly depending on whether the access port
radio is an 802.11a or 802.11bg model.