Motorola and V.32bis User Manual
Page 108
5-16 Using the AT Automatic Calling Interface
Using the
A
T
ACU
S-Register 38—Disconnect Buffer Delay
S-Register 38 determines how long the modem processes buffered data when a
disconnect is initiated. For S-Register 38 to affect the Delay option (AT
*
DB),
Delay (EC OPT’S menu) must be set to “Buf or S38” or “Buf & S38.”
S-Register 45—Access Security Tone Duration
This S-Register specifies the prompt tone duration when the ACCESS SECURITY
option Tone=Prompt Only or Prompt/Ack (AT
*
ZP). This delay is measured from
the time that the prompt tone is generated by the answer modem, to the time that the
answer modem detects the first digit of the calling modem’s password.
S-Register 46—Access Security Lead Digit Delay Timeout
This S-Register specifies the lead digit delay timeout when ACCESS SECURITY
Tone (AT
*
ZP) is enabled.
S-Register 96—Signalling System #5
This S-Register specifies whether Signalling System #5 is enabled.
Stored in Nonvolatile Memory?:
Yes
Status-Only?:
No
Default:
5
Range:
0 to 255 (seconds)
Stored in Nonvolatile Memory?:
Yes
Status-Only?:
No
Default:
5
Range:
0 to 10 (seconds)
Stored in Nonvolatile Memory?:
Yes
Status-Only?:
No
Default:
12
Range:
0 to 255 (seconds)
Stored in Nonvolatile Memory?:
Yes
Status-Only?:
No
Default:
0
Range:
0 - 1