Motorola and V.32bis - Manual (Page 192)

C-12 Country-Specific Information
Countr
y
-S
pecific
Infor
m
a
ti
on
Operating Notes
This section summarizes useful operating information.
• Restricted front panel option settings do not appear in front panel menus
• PC software communication packages often send fixed initialization strings to
the modem (via AT commands). These strings do not account for country-
specific modem restrictions.
To make software communication package installation easier, the modem
responds as follows:
— If you enter a restricted AT, AT * , or AT& command for an option that is
completely restric ted, the m odem displays OK instead of ERROR. The
modem, does not, however, modify its configuration in this case.
IMPORTANT: The command does not change the modem
configuration. An OK lets the software package continue
communication with the modem. Some software packages may be
affected by this new functionality. Motorola recommends that you
change the initialization string of your software communication
package for the restricted options or option settings that may apply
in your country. Refer to the software package documentation for
further information.
— If you enter a restricted AT, AT * , or AT& command for an option that
has some restricted settings, the modem displays ERROR
— If you enter a restricted V.25 bis command, the modem responds with the
INValid message, INV
Standalone Modem Rear Panel Views
This section shows rear panel views for models 3260, 3261, 3265, and 3266.
Following each illustration is a list of the countries that use that modem version.
NOTE: For Models 3262, 3263, 3267 and 3268, the addendum, 326X Series Modem
Cards (shipped with the modem backplane), contains enclosure card and backplane
information.