Motorola and V.32bis - Manual (Page 236)

Index-2
and the ATD command 5-7
Canada C-6 , C-28
card modem 2-2
card modems in enclosure 2-14
Carriage return character (S-Register 3) 5-11
Carrier loss hang up delay (S-Register 10) 5-13
central site 4-18
change S-Register value 5-10
Character formats
for autobaud 5-5
ci rcuit quality monitoring system (CQMS) 1-7
cluster controller 4-18
COM port 6-2
command line 5-4
Command mode
leaving 5-8
command mode 5-3
Communications software
equipment needed 2-4
using with AT ACU 5-3
communications software 2-4 , 3-9 , 4-2 , 5-2 , 6-2
computer connectors 2-5
Configuration options
listed by AT command A-2
listed by menus A-2
selecting from front panel 3-5
configure a modem 5-3
configure and operate the modem 3-2
CONNECT 1200 message A-41
CONNECT message A-41
connector pinouts B-6
Connectors 2-5
country regu latory agencies 1-8
Czech Republic C-7
D
data carrier 5-13
data compression A-43
data encoding 4-23
data format 3-2
Data rates 1-5
default (defined) 3-5
Defaults
front panel 3-5
option sets 3-5 , 4-12
Delay before looking for DTR (S-Register 25) 5-15
delayed/forbidden lists C-23
Denmark C-7
di aling and storing numbers 5-2
Diagnostic tests 6-10
dial a telephone number 5-6
Dial line jack types
United States C-38
Dial modifiers A-39
dial wait A-39
disconnect A-40
flash A-39
pause delay A-39
presentation characters A-40
pulse A-39
quiet answer A-40
return to command state A-39
reverse A-40
tone A-39
dial modifiers A-39
dial wait modifier 5-12
Dialing
from keyboard 5-7
dialing into a LAN 4-18
digital interface B-2
DIP switch 2-5
DIP switches 2-5
Direct mode 5-13
Disconnect buffer delay (S-Register 38) 5-16
displaying S-register value 5-9
DOC
requirements C-28
DTE connectors 2-5
DTE inactivity disconnect (S-Register 30) 5-15
DTE port 4-20
DTE rates 1-5
DTMF tone duration (S-Register 11) 5-14
DTR delay 5-15
E
efficiency 4-23
EIA/TIA 232-D interface 2-6 , B-2
specification for B-2
electrical interface 6-2
Electrical interfaces 2-6
enclosure card modems 2-14
encoding 4-23
entering data on the front panel A-37
equipment damage 2-3
Error correction and data compression features 1-6
ERROR message A-41
Error messages
self-test 2-15
error messages 2-15
escape code 5-14
Escape code character (S-Register 2) 5-11
Escape code guard time (S-Register 12) 5-14
escape mode 5-3
escape sequence 5-5
Escape sequence (+++) 5-5
Example