Motorola and V.32bis - Manual (Page 56)

3-6 Getting Started
G
e
tt
ing Start
e
d
Example: Accessing a Configuration Option
To select a predefined configuration option set:
1) From the Data 9600 T/D? display, press until Select Options=1 displays.
2) Press to display Select Options:2, Select Options:3, or Select Options:4.
3) Press to select an option. The modem is now configured for the option.
Status Displays
The Data 9600 T/D? category is the default display when the modem is powered-up
or after the modem has “timed-out” (i.e., the front panel control keys have not been
used for at least five minutes). The data rate (9600, in the display Data 9600 T/D?)
is the current DCE (modem-to-modem) data rate. It varies with the speed at which
the modems connect. The Data 9600 T/D? category serves three primary functions:
• Talk/Data” Switch
• Operating Status Displays
• Option Sets/Dialing Options
Talk/Data Switch
Pressing
when Data 9600 T/D? is displayed toggles the modem between using:
• An external telephone to manually dial a telephone call
• The modem to dial a stored or unstored telephone number
Down
Steps through categories (example: Data 9600 T/D?, TEST OPTS,
MODULATION OPT’S), or, at a parameter within a category, scrolls through
the options.
Enter
Selects an option and/or initiates an action. This key also serves as a Talk/Data
“softkey,” allowing you to toggle between using a telephone and the modem to
establish a telephone connection.
Table 3-2.
Front Panel Keys
Keys Function
NOTES:
1) If you hold the or key down, it repeats until you stop pressing.
2) With the 3262/3267 Modems, to toggle between modem A and modem B front
panels, hold while pressing .
DATA 9600 T/D?
Select Options