1head - denmark—blind dialing, Denmark—blind dialing, C-32 – Motorola and V.32bis User Manual

Page 212: Hong kong and united kingdom—babt regulations, Compliance with bs6328: part 1: 1982 section 8.3, Compliance with bs6328: part 1: 1982 section 8.7

Advertising
background image

C-32 Country-Specific Information

Countr

y

-S

pecific

Infor

m

a

ti

on

Denmark—Blind Dialing

326X Series Modem users in Denmark must comply with the requirements in the
“Regulation Regarding Teleterminal Equipment” (No. 882, October 29, 1992),
available from the Danish Minister of Communications.

The setup of the modem must comply exactly with the restrictions within this
Denmark section and as specified in the Restricted Features Summary in this guide.

The factory default settings are in accordance with this requirement, and the modem
is shipped from Motorola with compliant settings.

Hong Kong and United Kingdom—BABT Regulations

The following sections outline the BABT regulations as they relate to Motorola
3265 and 3266 Modem operation in Hong Kong and the United Kingdom.

Compliance with BS6328: Part 1: 1982 Section 8.3

This modem is not suitable for use with circuits employing British
Telecommunications (BT) signaling of 2280 Hz.

The equipment detailed in this guide is designed for use on a 2- or 4-wire point-
to-point private circuit. It is not suitable for omnibus or multipoint circuits.

The frequency range of DC to 200 Hz is not used.

Compliance with BS6328: Part 1: 1982 Section 8.7

There is no DC interaction between the modem and the British Telecommunications
private circuit.

Advertising
This manual is related to the following products: