Motorola Communications Gateway - Manual (Page 10)

5 Communications Gateway User Guide
X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
Connector Panel
The connector panel provides cabling connectors and Ethernet status lights.
Item Description
1 The standard RJ-11 telephone ports provide connections for telephone
lines 1 and 2
2 When this light is on (green), the Ethernet connection is available. It blinks
when data is being transferred.
3 The Ethernet port provides a connection to Ethernet equipped computers
using a cable terminated with an
RJ-45 connector.
4 This light is on (green) for a 100Base-T link and off for a 10Base-T link.
5 The USB port provides a connection to USB equipped computers.
6 The Coax port provides a connection to the coaxial cable (coax) outlet.
7 If you experience a problem, you can push this recessed button to reset
the Communications Gateway (see
“Troubleshooting” on page 54).
Resetting may take 5 to 30 minutes because the Communications
Gateway must find and lock on the appropriate communications channels.
8 and 9 These labels provide the cable data and telephony MAC address es.
1 2 3 4 5 6 7 8 9