Motorola Communications Gateway - Manual (Page 30)

25 Communications Gateway User Guide
Setting Up a USB Driver in Windows 98 SE, continued
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
X
Home Print Exit
After all the necessary files are loaded, the window at upper left is displayed
confirming a successful installation.
10 Click Finish. The window at bottom left is displayed.
11 Click Yes to restart your computer.
When you have successfully finished setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows 95, 98, or Me” on page 33.
If you have difficulties setting up the USB driver, perform the procedure for “Removing the
USB Driver from Windows 98 or Me” on page 57 and then repeat this procedure. If that
does not correct your problem:
■ Contact your service provider
■ See the Software License and Warranty Information card provided with your
Motorola Communications Gateway for information about obtaining warranty
service.