Motorola Communications Gateway - Manual (Page 56)

51 Communications Gateway User Guide
Wall Mounting, continued
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
X
Home Print Exit
To mount your Communications Gateway on the wall:
1 Print the Wall Mounting Template on page 53:
Click the Print icon or choose Print from the File menu to display the Print dialog box.
(The example at left is from Adobe
® Acrobat ® Reader ® running on Windows 2000;
there may be slight differences in your version.)
Be sure you print the template at 100% scale. Be sure Fit to page is not checked in
the Print dialog box.
Click the OK button to print the template.
2 Measure the printed template with a ruler to ensure that it is the correct size.
3 Use a center punch to mark the center of the holes.
4 On the wall, locate the marks for the mounting holes.
Warning
5 Drill the holes to a depth of at least 3.8 cm (1 1 /
2
inches).
Before drilling holes, check the structure for potential damage to water,
gas, or electric lines.