Setting up a usb driver in windows 2000 – Motorola Communications Gateway User Manual
Page 31
Advertising
26
Communications Gateway User Guide
X
Home
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
Setting Up a USB Driver in Windows 2000
Be sure the Motorola Communications Gateway CD-ROM is inserted into the CD-ROM
drive before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard welcome window is displayed.
1
Click Next.
2
Be sure “Search for a suitable driver for my device” is selected.
3
Click Next.
Although your Motorola Communications Gateway model
number may be different than in the images in this guide, the
procedure is the same.
Advertising