Motorola Communications Gateway - Manual (Page 21)

16 Communications Gateway User Guide
Cabling and Startup for a Single User, continued
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
X
Home Print Exit
For safety and to prevent damage to the equipment, the Communications Gateway
is shipped with the battery wires disconnected. Do not short circuit the battery
terminals by simultaneously touching both terminals with a metal object.
12 Connect the black negative battery wire to the black negative (-) terminal on the
battery.
13 Connect the red positive battery wire to the red positive (+) terminal on the battery.
After you connect the battery, the Communications Gateway begins drawing power
but does not start.